Edible image size guide

Edible Image Size for Cake Pops

Print 1.25 inch (32 mm) circles for standard cake pops. Suppliers sell 1 to 1.5 inch circles for pops; the image is a flat disc bending over a ball, so staying at the smaller end stops it creasing.

Printed image · 1.25 in (32 mm)Standard cake pop · 1.5 in (38 mm)

Print at1.25 in (32 mm)

35 per A4 sheet35 per US Letter sheet

Free to design, no account needed. Print files come with a CakeyTops membership — 7 days free, then £4.99 a month.

Sizes at a glance

Sheet counts use the CakeyTops layout: a 6 mm gap between toppers so each one can be cut out cleanly.
UsePrint sizePer A4Per US Letter
Standard pops
Bends over the curve without creasing
1.25 in (32 mm)3535
Small pops
For pops nearer 1.25 in
1 in (25 mm)5448
Large or flattened pops
Best on a pop with a flattened front
1.5 in (38 mm)2424

Why this size

A cake pop has no flat top — the image has to curve over a ball, and the bigger the disc is against the pop, the more it has to bend. Past a point it creases. That is why pop images are sold small, from 1 to 1.5 inches, for pops of about 1.25 to 1.5 inches.

For a bigger picture, flatten the front of the pop slightly before dipping, or use a mould with a flat face.

How to put an edible image on cake pops

  1. 1

    Cut the circles first

    Have every circle cut and off its backing before you dip — the coating sets fast.
  2. 2

    Dip the pop

    Dip in melted candy melts or chocolate and let the excess drip off.
  3. 3

    Apply while it is wet

    Lay the image on the front while the coating is still wet, so it sets in place.
  4. 4

    Hold until set

    Stand the pop upright and leave it until the coating is firm.

Tips that save a sheet

  • Work in small batches — the image must go on before the coating sets.
  • Faces and photos need the 1.5 inch size on a flattened pop.

Frequently Asked Questions

What size edible image for cake pops?

1 to 1.5 inches. 1.25 inches (32 mm) suits a standard pop of about 1.5 inches.

When do you put an edible image on a cake pop?

Straight after dipping, while the coating is still wet, so the image sets into it.

How many cake pop toppers fit on a sheet?

With a 6 mm cutting gap: at 1.25 inches, 35 per A4 sheet and 35 per US Letter sheet; at 1 inch, 54 per A4 sheet and 48 per US Letter sheet.

Sizes checked against: Schaffer Printworks size guide · Daisy Makes — cake pop images · Sweetie Pops Cake Pops. Sheet counts come from the CakeyTops editor itself.