Construction Cake Toppers
Yellow and black stripes say building site faster than any drawing of a digger. This design is a hazard-striped band with a hard hat at the top and three traffic cones at the foot.
Construction Cake Topper sizes
If toy diggers are on the cake, put the printed topper on the front edge or on the cupcakes. It needs flat icing, and a building-site cake rarely has any on top.
| What it is for | Finished size | Why |
|---|---|---|
| Topper for a 6" cake | 3.5–4 inches | Leaves a border of icing round the edge. |
| Topper for an 8" cake | 5–5.5 inches | The most common single-cake size. |
| Cupcake discs | 2 inches | 15 on an A4 sheet, 12 on US Letter. |
| Mini cupcake discs | 1.25 inches | The stripes and the hat survive; the cones merge. |
Covering the whole top with an edible image instead? The edible image size chart has exact print sizes for 6, 8 and 10 inch cakes, cupcakes, cookies and more.
Most construction cakes already have the diggers: toy ones, working on a pile of crushed biscuit. So the topper’s job is the sign on the site fence. It carries the name and the age, and leaves the machinery to the toys.
Construction colours
- Yellow, black and a little orange. That is the whole palette and it should stay that way.
- Yellow prints lighter on icing sheets than on screen. The black stripes are what keep the band strong.
- Chocolate buttercream and crushed biscuit make the “dirt”. The cream centre of the topper is there to stand out against it.
Use the charcoal lettering supplied. Yellow lettering on cream cannot be read.
What to write on a construction topper
“Site boss” and the name gets the smile from the adults. “Dig in” is the one for cupcakes.
What to print it on
- Edible icing sheets for toppers that sit on the icing and get eaten. They need a dedicated edible printer with edible ink.
- Cardstock at 250–300gsm for a topper on a food-safe stick that is not eaten.
- Toy diggers are not food-safe. Wash them and stand them on a cake card or a layer of crushed biscuit, with baking paper under the wheels where they touch icing.
Start from a template
The “Digger days” starter is a yellow hard hat and three traffic cones inside a yellow and black hazard band.
See the digger days designMore party themes
Each one has its own original design, with sizes, colours and wording for that theme.
Frequently Asked Questions
What do you write on a digger birthday cake?
The name with a job title such as “Site boss”, and the age. “Dig in” or “Under construction” suit cupcakes.
Can I use a branded digger or a TV builder?
Not on a cake you sell. Machinery makers’ logos are trademarks and TV characters are copyrighted, and printing them on paid-for bakes needs a licence. This design uses a plain hard hat and cones drawn by CakeyTops, with no logo.
What resolution should a printed cake topper be?
Export at 300 DPI. Below about 200 DPI the edges of text and artwork go soft once printed at topper size, and it is very obvious on a 3 inch disc held a foot from someone’s face. The editor exports at 300 DPI by default, so the main thing to watch is the resolution of whatever image you started from.
How do I cut a printed topper out neatly?
For circles, a set of nesting circle cutters gives a far cleaner edge than scissors — press straight down on a hard surface rather than rocking. For shaped toppers, a craft knife against a metal ruler beats scissors on straight edges. Cut just inside the printed border so no white shows at the edge.
Related guides
Racing Car Cake Toppers
A printable racing car cake topper with a chequered-flag band and a red car already in place. Free to design: add the name and number, then print at 300 DPI with a membership.
Farm Animal Cake Toppers
A printable farm cake topper with a pig, a sheep and a chick already in place. Free to design: add the name and age, then print at 300 DPI with a CakeyTops membership.
Dinosaur Cake Toppers
Design a printable dinosaur cake topper free: a friendly stegosaurus with room for the name and age. Print a 300 DPI sheet with a CakeyTops membership.
