“Brush and leaf” · Free to customise
Name Cake Topper Template
A loose watercolour-style leaf wreath around a script name. Open it in the editor, replace the sample message and choose the size for your cake or cupcakes.
Use this templateNo account needed to edit. Downloading comes with a CakeyTops membership.
- You can change
- Text, size & shape
- You download
- A 300 DPI PNG
- You print on
- A4 or US Letter
Why this design works
Every other design in the set is drawn clean and flat. This one is drawn to look painted: each leaf is a translucent wash with a darker pool at the stem, the ink outline sits a little off the colour, and no two leaves are the same shape. The two arms of the wreath are different lengths and leave a gap at the top, tied at the bottom, so it reads as something arranged by hand rather than a stamped ring. It carries no occasion, which is the point — the name is the design.
What to put in the centre
The blank centre is the point of the design. These are three that work, and why:
- “Olivia”
- A short name at full size is what the script is for.
- “Mr & Mrs Patel”
- Longer, so set it smaller and check it still reads at the size you print.
- “Nanny Jean”
- Two short words fit on one line above the flourish.
Sizes for this occasion
Size a name topper by the letters, not the outline. If the name has more than about eight letters, a circle forces the type too small — switch to a wide plaque, or split a double name over two lines.
| What it is for | Size |
|---|---|
| Short name on a 6" cake | 3.5–4 inch disc |
| Name on an 8" cake | 5–5.5 inch disc |
| Long name as a plaque | 6 × 2.5 inches |
| Name on a stick, above the cake | 5–6 inches wide |
| Initial on a cupcake disc | 2 inches |
The name cake toppers guide covers the palettes, wording and materials for this occasion in full.
Printing it
Type the name over “Olivia”. Short names suit the script; for a long or double-barrelled name, drop the size or switch to a block typeface so every letter stays readable.
Choose A4 or US Letter and download a 300 DPI PNG. Print at 100% / actual size. Use a normal printer for paper decorations, or dedicated edible printing equipment for edible toppers. Materials and printing are not included.
You can design and preview before signing in. The watermark-free 300 DPI download is included with a CakeyTops membership at £4.99/month, along with unlimited printing and AI artwork — the first 3 days are free. See what is included
Frequently Asked Questions
What size should this any occasion topper be?
Short name on a 6" cake takes 3.5–4 inch disc, and name on an 8" cake takes 5–5.5 inch disc. Size a name topper by the letters, not the outline. If the name has more than about eight letters, a circle forces the type too small — switch to a wide plaque, or split a double name over two lines.
What can I personalise?
Change the name, message, lettering colour, size and shape in the editor. The illustration itself has a fixed palette. Personalising is free and needs no account; the watermark-free 300 DPI download is included with a CakeyTops membership, which starts with a 3-day free trial.
What do I print it on?
Cardstock at 250–300gsm for a paper topper on a stick, or an edible icing sheet if it will sit directly on buttercream and be eaten. Edible printing needs a printer dedicated to edible ink — you cannot use one that has had regular ink through it. Print at 100% or "actual size", never "fit to page", which silently shrinks the topper.
Anything to watch when printing this design?
The washes are pale on purpose and will print paler on an icing sheet. Print one test disc: if the leaves look washed out on your printer, raise the saturation slightly rather than the contrast, which hardens the edges.
More designs
Lucky clover
A four-leaf clover and a gold horseshoe inside a green scalloped edge.
Sunny days ahead
A big sun over palm fronds and gentle waves, inside a teal band.
Home sweet home
A little house, a gold key and two hearts inside a sage scalloped edge.
